One-Zero Arcade Stick

One-Zero Arcade Stick
One-Zero Arcade StickOne-Zero Arcade StickOne-Zero Arcade Stick
Our Price:  £97.95
  (13 Reviews)



No stock

For more information on the free assembly service, please see the Free Assembly Service tab below.

Brand:  Blunderbuss Designs

This product is for a One-Zero Arcade Stick (v1.1) enclosure only. To receive a fully built Arcade Stick please follow the instructions in the Free Assembly Service tab below.

The purchase of this enclosure includes the following items:

  • Black / white Neutrik USB adaptor and rubber gasket (do not select add mounting hardware at checkout).
  • All required bolts pre-mounted to the relevant positions.
  • 25cm long USB 2.0 cable.
  • 2.0m long USB 2.0 cable.
  • 4 x Penn Elcom 38mm rubber feet or option to upgrade to an anti slip mat.

Please note that this enclosure may have small isolated errant flakes or minor imperfections on the powder coating, however overall aesthetic appearance will be excellent.

  • Size 380mm x 225mm x 62mm. 
  • 2mm thick cold rolled mild steel (top part of enclosure).
  • 2mm thick cold rolled hardened aluminium (bottom part of enclosure).
  • Polyester sand texture powder coating finish. ​
  • Cut out for 6 no. auxiliary 24mm buttons. 
  • Cut out for 8 no. action buttons (Sega 2 player side Astro City Cab layout). 
  • Cut out for Neutrik USB adaptor. 
  • Compatible with Sanwa, Seimitsu, Crown and Gamer Finger buttons. 
  • Compatible with the following joysticks:
    • ​Sanwa JLF and Hori Hayabusa.
    • Seimitsu LS32, LS38 and LS40 using the SS or MS plate.
    • Seimitsu LS56, 58 and 60 using SE P40 plate or MS plate.
    • Seimitsu LS62 using the SS P40 plate.
    • Cool Bear, Fanta and Crown levers.
  • Joysticks are mounted 8mm from topside of enclosure to top side of stick mounting plate.
  • Mount for Brook fighting board PCB. 
  • Mount for 4 no. 38mm diameter Penn Elcom rubber feet.

To take advantage of the free assembly service and to receive a fully built and ready to use Arcade Stick, please include the following products in your order:

Average Rating (13 Reviews):  
Write a Review and share your opinions!

Very impressive!
Sunday, 21 February 2021  | 

I don't normally resort to exclamation marks, in fact it took me a second or two to find it on the keyboard, but this case deserves one. The tank like construction quality has been mentioned by most of the other reviewers but it's worth repeating. This thing is really built. It would also hurt if you dropped it on your foot so I'm glad I went for the non slip rubber sheet which I would also recommend. The close fit between the top and bottom halves also shows quality. I think Blunderbuss should put a few more photos on the site to show people what they're getting, particularly the inside which is well done and makes the assembly easier with mounts for a Brook fighting board as well as Japanese and Korean joysticks.
I went for the burgundy finish and now I have it here I love it. The powder coating has a sort of eggshell texture and feels like it should withstand a lot.
This is the best joystick enclosure I've ever seen and I doubt you'll find better!

Was this helpful to you?  Yes  /  No

This review has not been appraised.

The Best Option Out There
Tuesday, 1 December 2020  | 

After browsing all over the internet looking for the right arcade stick I finally came across the One-Zero. This product is built to last, it's a full metal enclosure that offers great size, comfort, and is very mod friendly for future upgrades/replacements.

In comparison to other high-end arcade sticks offered for either the same price or around $100 cheaper, the One-Zero is worth the extra cash, especially since you can have the team at Blunderbuss build the stick for you at no extra cost (It also ensures you get a working stick cause they test it!). Other sites/companies that build arcade sticks either don't assemble anything for you and you have to do it yourself, or it costs extra when you're already paying more than $200 for a stick.

Now the biggest selling point for me and potentially other international buyers is the import duties. I live in Canada so buying something from a US site wasn't a great option because even though the prices for the sticks were about the same, I would have died from paying the import duties. Canada and the UK have trade agreements in place that don't result in buyers paying import duties. The only thing you will have to pay "extra" is the provincial sales tax when the stick actually enters Canada, that's it.

Overall I couldn't be happier with my purchase, it's definitely "the stick" for me. I don't see myself having the need to buy another stick for any reason. This thing rocks and everyone that's seen pictures of it is always impressed and every time I hold the stick I get excited to play games.

5/5 stars would recommend!

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.

I went looking for a Panzer...
Thursday, 2 July 2020  | 

...but found a Challenger instead

Please allow for a small criticism; the aux buttons arrangement (four on the right side of the Neutrik and two on the left), make a standard pre-made 4 pin harness (for L3-R3-TP) -such as the Brook one- pretty awkward to use (the length of the ground wire daisy chain is barely able to reach between the TP and R3 buttons). Result: dangerously bent terminals, but at least it works.

I guess the Blunderbuss harness is tailored to fit, but it's still out of stock.

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.

Like a tank
Thursday, 25 June 2020  | 

Fantastic enclosure, built like a tank and easy to build in.

The button layout (Sega 2P I think:?) is really comfortable to use and there is plenty of room for your palms if you like to rest them on the controller. I have big hands and this is an issue for me with many arcade sticks.

I was a bit worried it would sound and feel like a tin box, but it's solid, very solid.

Building in it was simple, it has standoffs for brooks fighting boards and a lip on the front and back sides which you can tuck wires behind or add lighting or whatever else takes your fancy.

The only downside is that I'm already thinking about getting another.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

All Class, Zero Complaints
Tuesday, 23 June 2020  | 

The One-Zero is awesome. It has everything I'm looking for in an arcade stick enclosure; full collar Korean lever compatibility out of the box, extremely precise cutouts, built in PCB standoffs, close to perfect fit and finish, you name it. I recently built in an Etokki Omni and the One-Zero is just as high quality but at a much lighter weight which I appreciate. This is the second product I've purchased from Blunderbuss (the Cool Bear Lever being the first) and both experiences have been close to flawless from start to finish. Don't be surprised when I come back for another - but this time in white.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Fantastic product
Friday, 19 June 2020  | 

I went for a complete build from Blunderbuss and I am super happy with it. The case is very well made. This feels like the rolls Royce of arcade sticks to me and I think it will last me a lifetime! I have tried it with my MiSter FPGA board and I am also looking forward to using it on my Switch and PS3. Thanks Blunderbuss.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Great Case
Saturday, 13 June 2020  | 

Amazing case with top notch build quality and sturdyness, heavy but medium sized making it still suitable for travel, very easy to open up and mod any parts or add/change art work which looks great on case and doesn't move around on your lap much due to the weight, worth the money.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

One zero steel enclosure
Friday, 13 March 2020  | 

I bought this to build a good stick i could dual mod and use as a full purpose stick. itís amazing I love the weight and attention to detail, fits pretty much every common lever mounts absolutely love it! definitely going to be buying more if your on the fence donít be.. buy this you wonít be disappointed

Was this helpful to you?  Yes  /  No

This review has not been appraised.

No Fluff No Nonsense
Friday, 28 February 2020  | 

May not have the modularity of an AFS, but if you know what you're looking for you won't regret your purchase. High quality, well thought out, and has plenty of internal space for future modifications.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Premium Quality Case
Wednesday, 19 February 2020  | 

The One Zero arcade stick enclosure is easily the best case I've ever seen & now happily own! The level of design & engineering that has gone into it along with it's high quality parts & manufacture make it superior to all in every sense of the word. The enclosure even has a good weight to it and feels really solid whilst retaining nice clean & sleek lines. Get one, because you'll thank yourself that you did!

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Read all 13 customer reviews...

Others Also Bought
Neutrik Rubber Gasket
Neutrik USB 2.0 Adaptor
Sanwa OBSF Push Buttons
£1.90  -  £2.15
Clear Acrylic Cover
One-Zero Wiring Harness
Brook Fighting Board
£24.95  -  £88.95